A compact on-wall temperature sensor. Designed for indoor temperature measurements.
Note: The product was phased out of production and will be available only until its stock lasts. The sensor was replaced by the 1W-T-IB2.
The 1W-T-IB sensor is designed for interior measurements of temperature and relative humidity in buildings. Its circuit board is placed within an on-wall box (P30 protection). The sensor can be also placed within a universal wiring box (KU68).
The sensor communicates with the master system using the 1-Wire bus (spring terminal, four conductors) and is fully compatible both with the Mervis IDE, an officially supported SW platform for Unipi products, and with the EVOK, an open-source application programming interface (API).
The installation guide and technical parameters can be found in the product's datasheet (see the Files tab above).
Datasheet of the product
|Temperature measuring range||-30 °C/+100 °C (+-1 °C accuracy)|
|Connection||1-Wire (screw terminal)|
|Power||5 V (available on a connector along with 1-Wire)|
|Dimensions||80 × 80 × 25 mm|
|Max. current draw||1 mA|
|Installation||Wiring box (KU 68)|