Power supply 5 V⎓, 2.4 A with DIN rail holding recommended for Unipi 1.1, Unipi 1.1 Lite, and 8-Relay Addon EMO-R8 products.
Power supply recommended for Unipi 1.1, Unipi 1.1 Lite, and 8-Relay Addon EMO-R8 products. Can be installed to DIN rail (35 mm). The complete technical specification can be found in the product datasheet. Along with this product comes power cable with an appropriate connector.
IMPORTANT: This power supply is NOT recommended for Neuron and Patron products.
Technological specification of the product
3D STEP model
3D model file in *.step format
|Current range||0 ~ 2.4 A|
|Dimensions||95 mm × 60 mm × 25 mm|
|Rated Current||2.4 A|
|Rated power||12 W|
|DC Voltage||5 V|