Home Shop 1W-T-IB2 on-wall temperature sensor

1W-T-IB2 on-wall temperature sensor


Compact 1-Wire on-wall temperature sensor. Designed for indoor temperature measurements.

Note: The product is a development successor to the 1W-T-IB sensor.

31,50 €
26,03 € excl. VAT
More than 20 items in stock


The 1W-T-IB2 sensor is designed for interior measurements of temperature and relative humidity in buildings. Its circuit board is placed within an on-wall box (IP30 protection). The sensor can be also placed within a universal wiring box (KU68).

The sensor communicates with the master system using the 1-Wire bus (screw terminal, four conductors) and is fully compatible both with the Mervisan officially supported SW platform for Unipi products, and with the EVOK, an open-source application programming interface (API). For more info about the available software, please visit Unipi Knowledge Base.

  • Mervis: The sensor is based on the DS18B20 chip used in other 1-Wire thermometers on the Unipi e-shop and is used in the same way.
  • EVOK: The sensor is detected automatically and can be used right away. Measured values are accessible on an address of the particular sensor also serving as a device identification. You can find the address on a sticker provided with the product. 

The installation guide and technical parameters can be found in the product's datasheet (see the Files tab above).

Further info


Product datasheet
Product features and technical information

Temperature measuring range -40 °C/+85 °C with +-0.5 °C accuracy
Connection 1-Wire (screw terminal)
Sensor type DS18B20
Power 5 V (throught the 1-Wire connection)
Case material ABS plastic
Dimensions 100 × 100 × 25 mm
IP rating IP30
Installation Installation box (KU 68)
Max. current draw 2 mA