Industrial PoE injector provides a maximum output power of up to 30 watts according to the 802.3at standard via an Ethernet cable. The power supply is realized by a pair of power inputs, each intended for a separate power source, ensuring redundancy. Any power source in the range of 12 to 48 V DC can be used for power supply.
IP30 protection, aluminum chassis, operating temperature -40 °C to 75 °C, DIN rail or wall mounting.
The IPOE-162 provides up to 30 watts and 56 V DC power supply via a Cat.5/5e/6 Ethernet cable and simultaneously transmits data between the injector (IPOE-162) and the powered device. The maximum distance between the injector and the powered device is 100 meters.
Together with a PoE splitter (e.g. IPOE-162S), it is especially suitable for powering Unipi PLCs at longer distances, where an electrical socket (110/230 V AC) is not available. PoE power supply can also be implemented on gigabit Ethernet, supports IEEE 802.3at / 802.3af and data flow 10/100/1000 Mbps.
Information about the manufacturer:
PLANET Technology Corporation
11F., No. 96, Minquan Rd., Xindian Dist.
New Taipei City 231, Taiwan (R.O.C)
[email protected]
Responsible party for the EU:
KASSEX s.r.o.
Kojetínská 3368
Kroměříž
767 01
Czech Republic
[email protected]
|
Product datasheet Product features and technical information |
download | |
|
Instruction leaflet Technical and safety information |
download | |
|
Certification Declaration of conformity |
download |
Detailed parameter information and exact I/O specifications can be found in the datasheet.
| Communication interfaces | 2 x RJ-45 10/100/1000Mbps: 1 x data input, 1 x data output + power supply, 1 x terminal board master-slave input |
| Power consumption | max. 32 W |
| Control voltage | 12 to 48 V DC (redundant) |
| Rated power | 30 W |
| Operation temperature | -40 to 75 °C |
| Dimensions | 135 × 87 × 32 mm |
| Weight | 489 g |