Power supply for DIN rail - 24V DC, 0.63A
Mean Well HDR-15-24 DIN rail power supply (24V DC @ 0.63A) Recommended for Neuron and Patron products.
A DC power supply recommended as a power source for Unipi Neuron and Unipi Patron controllers. Designed for installation onto a DIN rail, the complete technical specification is available in the product datasheet (see below).
IMPORTANT: This power supply is tested and recommended for Neuron S and Patron S models. Although the power supply is compatible with larger Neuron/Patron M and L models, its use can result in reduced performance in case other features (ie. USB ports) are used. For the Neuron/Patron M and L models, the Mean Well HDR-30-24 power supply is recommended instead.
Note: The HDR-15-24 cannot be used for Unipi 1.1 and Unipi 1.1 Lite controllers. For these products, either the 5V power supply or the Mean Well HDR-15-5 power supplies are recommended instead.
Information about the manufacturer:
Mean Well
Langs de Werf 8, 1185XT Amstelveen, The Netherlands
E-mail: [email protected]
Documentation
|
Datasheet Technological specification of the product |
download | |
|
3D STEP model 3D model file in *.step format |
download |
Detailed parameter information and exact I/O specifications can be found in the datasheet.
| Rated power | 15.2 W |
| Dimensions | 95 mm × 60 mm × 25 mm |
| Weight | 100 g |
| Current range | 0 ~ 0.63 A |
| Model name | DR 15-24/HDR-15-24 |
| DC Voltage | 24 V |
| Rated Current | 0.63 A |
| Manufacturer | Meanwell |
Related products
