RS485/M-Bus-5 converter
Communication converter used for connecting M-Bus devices into systems using the RS485 interface.
Permanent replacement for the RS485/M-Bus-4 Converter.
Device description
The RS485toMbus-5M communication converter is used for connecting M-Bus devices into systems using the RS485 interface. The converter is designed for protocol conversion without changing the content of M-Bus messages and is primarily intended for reading data from M-Bus water meters, electricity meters, heat consumption meters, and other similar devices.The device allows the connection of up to five M-Bus devices in Slave mode and is equipped with above-standard overvoltage protection and fault protection on the M-Bus. The converter is also equipped with four LED indicators to display power supply, M-Bus communication, and error states.
Detailed technical data can be found in the user manual (see the Files tab above).
Documentation
|
Instruction leaflet Technical and safety information |
download | |
|
Manual User guide and technical documentation |
download |
| Max. number of M-Bus slave devices | 5 |
| Transmission speed | 300 – 9600 bps |
| M-Bus galvanic isolation | from M-Bus line 1kV |
| Power | 7.5 V to 40 V DC / 7.5 V to 28 V AC |
| Indicators | LEDs for indication of power, M-Bus operation and error states |
| Operation temperature | -20°C to 70°C |
| Dimensions | 56.5 × 17.5 × 97.5 mm |
| IP rating | IP20 |
| Installation | DIN rail (35 mm) |
| Connnector type | pluggable terminals, wire gauge max. 2.5 mm |
